(+49) 3331 / 25 716 30
info@akotec.eu
     

Equipment

When it comes to a big solar plant in the industrial field, every screw and every equipment is very important, because these little things hold together the system of the solar plant. But if you notice any weakness with your solar system, that is not a problem at all! We have different equipment items und small parts ready to ship to you to avoid a complete failure of the whole system. Listed below you can see our models and accessories for your AKOTEC plant. We are happy to help you, if you have any additional question!

Universal equipment

The universal equipment fits into every solar system from AKOTEC, no mattter if its Heat Pipe or Direct Flow. We also ship single and individual equipment items, depending on what you need. If the warranty doesn't apply anymore, we are still there to help you guide through the problem and to find a solution. Just ask!


  • Collector Housing Connection Set

    Art.-No. 20079

    Stainless steel housing connection for connecting the support brackets and/or foot parts

    Consisting of:

    • 2 x Stainless steel housing connection
    • 4 x Stainless steel locking nut

  • Annular Hose
    Fitting

    Art.-No. 22111

    • For DN20 onto compression fitting 18 mm
    • Connectable with AkoTec connection kit
    • Metallic sealing

  • Quick-fitting
    corrugated hose DN16

    Art.-No. 22112

    • For DN16 onto 3/4” external thread
    • Connectable with solar station
    • Metallic sealing

  • Quick-fitting
    corrugated hose DN20

    Art.-No. 22118

    • For DN20 onto 3/4” external thread
    • Connectable with solar station
    • Metallic sealing

  • Corrugated
    hose coupling DN16

    Art.-No. 22105

    • For DN16 onto DN16
    • Metallic sealing

  • Corrugated
    hose coupling DN20

    Art.-No. 22113

    • For DN20 onto DN20
    • Metallic sealing

  • Quick
    Fitting

    Art.-No. 22118

    • Quick fitting for annular hose DN20 onto 3/4″ external thread
    • Connectable with solar station

  • Quick
    Fitting

    Art.-No. 22122

    • Connectable with solar station
    • Metallic sealing screw connection for direct connection
    • DN20 onto 1″ external thread

  • Quick
    Fitting

    Art.-No. 22123

    • Metallic sealing screw connection for direct connection of the angulated hose to the solar station
    • DN20 to 3/4" internal thread

  • Twinway – Split Annular Hose

    Art.-No. 22100

    • Twinway split DN16 flexible tube PN10
    • With HT insulation 20×18 made of syn. caoutchouk with PE cover (separable)
    • Temperature max 175°C, insulation thickness: 20 mm
    • Colour: black with 2-wire silicon control cable 2 x 0,75 mm²

  • Twinway – Split Annular Hose

    Art.-No. 22110

    • Twinway Split DN20 annular hose PN10, with HT insulation 20 x 28 made of synthetic rubbers with PE protective foil (separable), maximum temperature 175 °C
    • Insulation Thickness: 20 mm
    • Color: black with with control cable (silicone, 2-wire) 2 x 0,75 mm²

  • Collector Mounting Set on Roof

    Art.-No. 20084

    • Universal for df & hp
    • For installation on roof rafter of suitable tin roofs, parallel to the roof
    • Snow load < 2,5 kN/m³ (DIN1055)

    Consisting of:

    • 4 x ALU rafter rack
    • 4 x ALU roof hook for rafter construction
    • 2 x 2000 mm ALU 4-groove profile
    • 4 x screw M8x20 V2A
    • 8 x self locking nut M8 V2A
    • 4 x nut M8 V2A
    • 4 x grub screw M8 V2A
    • 1 x various small parts
    • 1 x mounting instructions
    Installation Manual

  • Roof mounting kit for slate or clapboard roof

    Art.-No. 20220

    • Roof mounting kit for mounting the collectors on a slate or clapboard roof
    • For pitched roofs

    Consisting of:

    • 4x slate- mounting plates
    • Including mounting hardware
    • 2x aluminum extruded profile 2000mm
    • 4x clamping angle
    • 1x screws, stainless steel V2A
    • One set is required per collector

  • Basic Elevation
    Set

    Art.-No. 20070

    • For elevating the collectors
    • Per collector 1 set necessary
    • Adjustable through threaded bushing distance of 1945 mm completely assembled
    • Only opening and tightening the screw
    • Possible angles: 34 ° – 44 °every 1 add-on set
    • the angles 23 ° to 30 ° and 43 ° to 58 ° on request

    Consisting of:

    • 2 x Alu easy & fast elevation
    • Per 1 screw M8 x 40 and 1 self-locking nut
    • 4 x Screw DIN 933 M8 x 25 A2 for collector fixing
    • 4 x Washer DIN 9021 8,4 A2 for collector fixing on concrete / brick
    • 1 x Clamping set for mounting set for fixing on concrete basement
    • 1 x Cross beam set for diagonal fixing inkl. 2 cross beams, screws, nuts, washer
    • 1 x Joint Plate (for field interconnection)
    Installation Manual

  • Roof Pipe Lead-Through

    Art.-No. 20256

    • Universal roof lead-through
    • Suitable for almost all tin roofs

  • Roof Pipe Lead-Through

    Art.-No. 20257

    • Universal roof lead-through
    • Suitable for almost all tin roofs
    • Colour: brick red

  • Filling Station

    Art.-No. 80004

    • For commissioning and maintenance of closed systems, like solar systems and floor and wall heating
    • Cost-saving flushing, venting and filling in one step
    • Dimensions (H/W/D): 1000 x 430 x 470 mm
    • Weight unfilled: 24 kg
    • Container capacity: 30 L
    • Flow volume: max. 47 l/min
    • Delivery head: 52 m
    • Pump capacity: 230 V, 1110 W
    • Ball shut-off valve: 3/4” union nut
    • Backflow valve: 3/4”
    • Empty valve: 1/2” for container emptying
    • Pumped fluids: water and glycol mixture
    • Maximum medium temperature: 60 °C

  • Multipurpose drill

    Art.-No. 80200

    • Suitable for almoste all roof types

  • Bird Protection Rail

    Art.-No. 13510

    • For application on horizontal tubes
    • Special spikes prevent the pollution, f.e. by pigeons
    • Consisting of: spike profile, 2 x support clip
    • Length: 1 m

  • Cotton Gloves

    Art.-No. 80100

    • For collector mounting

  • Separate Tube Packaging

    Art.-No. 99974

    • For shipment of a separate sample or replacement tube

  • Air pot

    Art.-No. 25020

    • Constiting of: 1 x Air pot, isolated

  • Fixed Piping Set for Air Pot

    Art.-No. 25050

    • 2 x Compression fitting 18 x 18
    • 4 x Brass supporting sleeves
    Installation Manual

Equipment for the heat pipe collectors

Here you can find the equipment for the Heat Pipe collectors. Our solar plants differ between two systems and their each and own accessories. It is very important to know, that the accessories for the Heat Pipe systems can only be used within this system. Direct Flow equipment won't fit. For further questions regarding your solar plant, contact us directly.


  • Mounting Set for Annular Hose Including Sensor Pocket

    Art.-No. 20026

    • 2 x Annular hose DN 16 at 850 mm
    • Isolated
    • With collector connection with sensor pocket
    • Per collector/field 1 set necessary

  • Mounting Set for Annular Hose Excluding Sensor Pocket

    Art.-No. 20027

    • Insulated with HT Armaflex and fabric hose
    • 2 x Annular hose DN 16 at 850 mm
    • With collector connection without sensor pocket
    • Isolated
    • Per collector/field 1 set necessary

  • Mounting Set for Rigid Piping Including Sensor Pocket

    Art.-No. 20120

    • 2 x rigid piping 100 mm
    • Isolated
    • Including collector connection with sensor pocket
    • Per additional collector/field 1 set necessary

  • Mounting Set for Rigid Piping Excluding Sensor Pocket

    Art.-No. 20121

    • 2 x rigid piping 100 mm
    • Isolated with EPDMplus
    • With collector connection without sensor pocket
    • Per additional collector/field 1 set necessary

  • Collector connection Including Sensor Pocket

    Art.-No. 01256

    • With clips, O-rings and sensor pocket
    • Isolated

  • Collector connection Excluding Sensor Pocket

    Art.-No. 01258

    • With clips and O-rings
    • Isolated
    • Connector without sensor pocket

  • Collector Connection for Rigid Piping

    Art.-No. 20028

    • Cu tube 18 x 08 x 100 mm
    • Isolated with HT-Armaflex

  • Quick connection for Annular Hose DN16

    Art.-No. 22102

    • For annular hose DN16 onto HP funnel
    • Metal sealing gland for direct connection of the annular hose to the heat pipe collectors

  • Quick connection for Annular Hose DN20

    Art.-No. 22114

    • For annular hose DN16 onto HP funnel
    • Metallic sealing screw connection for direct connection of the annular hose to the heat pipe collectors

  • basic elevation
    set 10°

    Art.-No. 20275

    • With variable inclination 9 ° - 17 °
    • One set is required for each collector.
    • Consist of:
    • 2 x aluminum quick stand
    • 2 x diagonal bracing
    • 1 x clamp bracket set for attachment to concrete / stone
    • Various fastening and small material

  • Quick connection for Annular Hose DN20, angulated

    Art.-No. 22117

    • For annular hose DN20 onto HP funnel
    • Metallic sealing screw connection for direct connection of the annular hose to the heat pipe collectors
    • 90° angulated

  • Quick connection for Annular Hose DN16, angulated

    Art.-No. 22104

    • For annular hose DN16 onto HP funnel
    • Metallic sealing screw connection for direct connection of the annular hose to the heat pipe collectors
    • 90° angulated

  • Annular Hose

    Art.-No. 20024

    • Annular hose DN16, 850mm
    • Insolated with HT-20×018
    • With fabric tube

  • Set Side Cover

    Art.-No. 20011

    • 4 x Side coverl
    • 14 x Screws

  • Heat Transfer
    Fluid VT51 hp

    Art.-No. 81000

    • VT 51 hp heat transfer fluid
    • 20 kg Canister
    • Readily mixed
    • down to -30°C
    • Colourless
    • biodegradable, non-toxic

  • Narva Heat Pipe Power Tube 100 °C

    Art.-No. 70300

    • Tube with absorber coated on both sides
    • 2000 mm
    • 100 ° C max. system temperature
    • Separate

  • Narva Heat Pipe Power Tube 100 °C - 10 pieces

    Art.-No. 70301

    • Tube with absorber coated on both sides
    • 2000 mm
    • 100 ° C max. system temperature
    • Packed in units of 10 pcs.

Equipment for the Direct Flow collectors

The equipment for the Direct Flow collectors was designed to fit this specific system only and should not be put into any solar plant that is not made for it. You need individual accessories for your solar plant? No problem, we ship your equipment depending on what you need. Just contact our support, order and you are ready to go!


  • Mounting Set for Rigid Piping Including Sensor Pocket

    Art.-No. 20094

    • 2 x Connections for rigid piping
    • Cu 18 x 08 x 100 mm
    • Isolated with EPDMplus
    • With sensor pocket
    • Per additional collector/field 1 set necessary

  • Mounting Set for Rigid Piping Excluding Sensor Pocket

    Art.-No. 20095

    • 2 x Connections for rigid piping
    • Cu 18 x 08 x 100 mm
    • Isolated with EPDMplus
    • Without sensor pocket
    • Per additional collector/field 1 set necessary

  • Mounting Set for Annular Hose Including Sensor Pocket

    Art.-No. 20091

    • 2 x Annular hose DN 16 at 850 mm
    • Isolated
    • With collector connection with sensor pocket
    • Per collector/field 1 set necessary

  • Mounting Set for Annular Hose Excluding Sensor Pocket

    Art.-No. 20096

    • 2 x Annular hose DN 16 at 850 mm
    • Isolated
    • With collector connection without sensor pocket
    • 2Per collector/field 1 set necessary

  • Collector connection for Rigid Piping

    Art.-No. 20092

    • Rigid piping on Cu tube 18 x 08 x 100 mm
    • Isolated with EPDMplus hose with fabric protection

  • Collector Connection Including Sensor Pocket

    Art.-No. 01036

    • With clips and O-rings
    • Isolated
    • Collector connection with sensor pocket

  • Collector Connection Excluding Sensor Pocket

    Art.-No. 01039

    • With clips and O-rings
    • Isolated
    • Collector connection without sensor pocket

  • Quick Fitting for Annular Hose

    Art.-No. 22115

    • Metallic sealing fitting for direct connection of annular hose with collector
    • DN20 x CU 18 (ribbing)
    • Straight outlet

  • Quick Fitting for Annular Hose

    Art.-No. 22115

    • Metallic sealing fitting for direct connection of annular hose with collector
    • DN20 x CU 18 (ribbing)
    • Straight outlet

  • Quick Fitting DN16
    90° angulated

    Art.-No. 22103

    • Schnellverschraubung für Wellschlauch
    • DN16 x Cu 18, Sicke

  • Quick Fitting DN20
    90° angulated

    Art.-No. 22116

    • Schnellverschraubung für Wellschlauch
    • DN20 x Cu 18, Sicke

  • heat transfer
    fluid VT51 df

    Art.-No. 81001

    • VT51 df heat transfer fluid
    • 20 kg Canister
    • ready mixed
    • down to -28°C
    • transparent red
    • biodegradable, non-toxic
    product information

  • Fixing set flat roof

    Art.-No. 20160

    • For stable, parallel fastening of DF collectors to facades (tubes always horizontal)

    Consits of:

    • 2 x alu mounting rail L=2000mm
    • 1 x grub screw (4 Stk.)
    • 4 x t-head bold M8x20
    • 4 x locking nut M8
    • 4 x U-profile (22,8 x 9,5) L=40mm
    • 4 x plastic dowel 12x71mm
    • 1 x installation manual

  • Fixing set facade

    Art.-No. 20165

    • For stable, parallel fastening of DF collectors to facades (tubes always horizontal)

    Consits of:

    • 2 x alu mounting rail L=2000mm
    • 1 x grub screw (4 Stk.)
    • 4 x t-head bold M8x20
    • 4 x locking nut M8
    • 4 x U-profile (22,8 x 9,5) L=40mm
    • 4 x plastic dowel 12x71mm
    • 1 x installation manual

  • Basic Set Vario Pro

    Art.-No. 20200

    • Wind load optimized flat roof mounting system (flat lying collector)
    • Ballast through concrete lintel (not included in delivery)
    • Per collector 1 set necessary
    Installation Instructions

  • Additional Set Vario Pro

    Art.-No. 20210

    • Flat roof mounting systems optimized for wind load (collector lying flat)
    • Weighting by a concrete lintel (not included in the scope of delivery)
    • Per collector 1 set necessary

  • Narva Direct Flow Power Tube

    Art.-No. 70011

    • Tube with absorber coated on both sides
    • 2000 mm
    • With inner tube, pressure spring, attachment piece and O-rings
    • Separate

  • Narva Direct Flow Power Tubes

    Art.-No. 70001

    • Tubes with absorber coated on both sides
    • 2000 mm
    • With inner tube, pressure spring, attachment piece, O-rings and silicon grease
    • Packed in units of 10 pcs

  • Set Side Cover

    Art.-No. 20010

    • 4 x Side cover
    • 14 x Screws

  • Annular Hose

    Art.-No. 20090

    • DN 16, 850 mm
    • Isolated with HT – 20 x 18
    • With flexible fabric tubing
    • bulk stock

  • Annular Bending Hose

    Art.-No. 20040

    • 350 mm, HT – 19 x 18
    • Both sides with 18 x 08 Cu nipple with groove
    • Preferably applied at balcony mounting
    • As connection between two collectors
    Montageanleitung (PDF)

order equipment now


Hinweis: Bitte die mit * gekennzeichneten Felder ausfüllen.


Contact


Gefördert durch das Ministerium für Wirtschaft, Arbeit und Energie aus Mitteln des Europäisches Sozialfonds und des Landes Brandenburg. Mehr erfahren

Funded by the Ministry for Economic Affairs, Labor and Energy with funds from the European Social Fund and the State of Brandenburg. Read more